jeep scale

multiply decimal with your scale
i.e. if your jeep length from radiator to back frame
is 18 inches, then frame #5 is 5.526 inches width
and 4.608 inches high, see decimal for frame 5 below
.307x18=5.526 width
.256x18=4.608 height

starts with five frames
format frame distance from back frame
       width and height
       
frame 1 front hood
frame 2 back hood
frame 3 windshield
frame 4 behind driver
frame 5 back door

frames:
#1 d1 w.17 h.128
#2 d.769 w.230 h.128
#3 d.769 w.256 h.256 // cutout for windshield
#4 d.533 w.307 h.256 // cutout behind driver
#5 d0 w.307 h.256

back frame center opening .128
center back frame opening
leftover is panel left and right

roof thickness .051
roof length .846
roof is flush with side panels
roof is flush with frame 3 windshield

outside floor width .333

side window from floor h.164
side window height .064
side window front distance .487
side window rear distance .077

running board distance up angle
towards front .795
running board distance angle
horizontal towards front .871

roof width is flush with side panel
top view running board is wider than
roof width so there will be a small lip
from the floor with the running board

front side panel opening
start from roof vertical flush from
frame 4 horizontal same as window
curve downwards all the way
to .692 from back frame
height of opening from floor .092
angle lower panel towards frame 3

side panel hump over rear wheel
center rear axle distance from back
.205, after determining rear axle, center
side panel hump, length of bump .205
height of hump .103

roof past back frame .092
floor past back frame .062
upper side panel lined up with window
past back frame .046